二、產品功能特點

智能電控操作系統（電控柜）主要特點及可以實現的功能：

1、一鍵式啟動、停止生產線（One button start or stop of the production line.）

• 在自動模式下，啟動設備只需要按一個按鈕，各個主機按照順序自動啟動；

  In auto mode, just press one button, all main machines will start in order.

• 需要停機時，按下停機按鈕，設備按照程序停機；

  When needed, all machines will stop in order by just press STOP button.

• 在檢修狀態，設備可以手動單個啟動，進行調試；

  In maintenance mode, each machine can be started alone for adjusting.

• 具備手動按鈕備用系統，在觸摸屏不能正常工作的時，可以通過按鈕開關控制生產線。

  Standby manual control system. Production line can be controlled by button switch in case that the touch screen does not work properly.

2、設備正常運轉時智能監測設備的工作狀態（Intelligently monitoring working conditions of the equipment during normal running.）

• 設備發生故障導致電機卡死時，系統根據電機所在的位置，自動停止與此設備相關聯的設備，

  When motor stops in case of equipment failure, the system will automatically stop all machines connected.  

• 通過主要機器的軸承溫度傳感器，反饋設備工作狀態；

  Working status can be monitored through temperature sensor of the bearing installed on the main machines. 

• 檢測各個主要主機電流和振動量（制砂機），處理器內部預設計算公式和標準負荷數據庫，判  斷生產線各個環節是否符合正常產量；

  Detect current of each main machine and vibration of sand making machine, and find out whether each unit works well or not through comparing data calculated by the default formula in the processor and standard load database

• 現場監控自動存盤，生產線操作室和管理者辦公室具備視頻監控功能，實時監控現場的工作狀態，保證生產安全，監督工作狀態。并將影像信息保持存盤30天，管理員可以隨時調閱當月的每天工作狀態；

  Automatically save of on-site monitoring data. There have video monitoring system in both operating room and administrator’s office. They can live monitoring production status of the site, to ensure production safety and supervision of working conditions. Video data of the monitoring can be stored for 30 days, the administrator can review working status of everyday of the month anytime.

• 生產線數據采集長期備份，管理員隨時可以調取各個時間段的工作情況，設備運轉情況；

  Life time backup for data of the production line collected. The administrator can review working conditions of the various periods of time and running status of the equipment.

• 系統設置密碼進入，防止誤操作造成安全隱患。

  Password is set for log in to prevent potential security problem from improper operation.

3、日匯報和月匯報（Daily report and monthly report）

• 生產線工作24小時后，會自動生成日匯報短信給管理者，包括日產能、電能消耗、當日工作總時間。

  Daily report including daily production capacity, power consumption, total working time of the day will be automatically generated and sent to the administrator via SMS every 24 hours of running of the production line. 

• 生產線工作30日后，會自動生成月匯報短信給管理者，包括月產能、月電能消耗、當月工作總時間。

  Monthly report of production capacity, power consumption and total working time will be automatically generated and sent to the administrator via SMS every 30 days of running of the production line.